
		    Digital Equipment Corporation
    NDIS 3.1 MiniPort driver installation guide for Windows NT 3.5x, NT4.0


The drivers named "DE305" conform to the NDIS31 MiniPort Spec. It can support
Windows NT3.5, NT3.51, NT4.0 and Windows 95 with different oemsetnt.inf file.
This driver also support the Windows NT 3.1 but user must replace NDIS.SYS
by NT 3.5 DDK's NDIS.SYS (\DDK\SRC\NETWORK\NT31BIN\I386\FREE\NDIS.386)

File description:

	DE305.SYS    : NDIS31 MiniPort driver
	OEMSETNT.INF : NT3.5x drivers information file (A:\)
	README.TXT   : Readme file

	NOTE:  OEMSETNT.INF file in Digital driver diskette  A:\


Installing driver on Microsoft Windows NT3.5x, NT4.0


   1)  In the Main group of NT, choose the Control Panel icon.

   2)  In the Control Panel window, choose the Network icon.

   3)  In the Network Settings dialog box, choose the Add Adapter button.
       The Add Network Adapter dialog box appears.

   4)  In the list of network cards, select "<other> Requires disk from
       manufacturer", and then press <Enter> button.

   5)  Insert this driver disk in drive A, enter drive and pathname A:\
       and then choose the OK button.

   6)  In the Select OEM Option dialog box, you will see DE305 DIGITAL
       EtherWORKS ISA Adapter in the menu, use OK button to install it.

   7)  And then DE305 DIGITAL EtherWORKS ISA Card Setup dialog box appear,
       you can specify "IRQ level" and "I/O Port Address" of the adapter
       plugged in your PC. However, this NDIS 3.1 mini port driver has
       support auto IO, IRQ scan for DE305 DIGITAL adapter, so driver can
       work even user select a wrong IO port and IRQ.

       For multiple cards installation, specify correct IO port and IRQ is
       necessary.

   8)  After that, installation is completed. Digital's adapter becomes one
       of those Installed Adapter Cards and driver become one of those
       Installed Network Software. You can see: "[0x]DE305 DIGITAL EtherWORKS
       ISA Adapter" within Installed Adapter Cards menu and "DE305 DIGITAL
       EtherWORKS ISA Adapter Driver" within Installed Network Software menu.

   9)  Now, the SYSTEM have already copied DE305.SYS from A:\WINNT\INTEL351
       directory to C:\WINNT\SYSTEM32\DRIVERS and the OEMSETNT.INF form
       A:\ to C:\WINNT\SYSTEM32 but renamed it to other installation
       information file. So next time, if you want to add Digital's adapters
       to your system, you do not need floppy diskette again.

  10)  To complete network installation, remember binding the adapter to
       transport drivers by choosing "Bindings" button under Network Setting
       dialog box.

  11)  Restarting your system you will acquire network service.


Trademarks:
Microsoft Windows NT is a trademark of Microsoft Corporation.


